Description

MagicFil Thermo PLA is based on our EasyFil PLA compound but with a touch of thermochromic magic added as MagicFil has a colour changing ability when heated above 29anddeg; C. MagicFilandrsquo;s anthracite grey colour will change into a natural PLA colour when the material reaches a temperature of 29anddeg; C or above.
Being based on our EasyFil PLA compound make MagicFil Thermo PLA a high end andldquo;easy to useandrdquo; impact modified PLA (Poly Lactic Acid) type of 3D printer filament which is optimized for FFF or FDM 3D printing technology. MagicFil Thermo PLA is tougher and less rigid than standard PLA and its improved filament flowing behaviour and interlayer adhesion make it an extremely easy to print filament.

Unique features

• Colour changing ability from anthracite grey to natural PLA at 29anddeg; C
• Anthracite grey colour andlt; 29anddeg; C andgt; natural PLA colour
• Very easy to print
• Warp free printing and no deformation after cooling
• Improved flowing behaviour and inter layer adhesion
• Good first layer adhesion to several (un)heated print surfaces
• Slightly softer than standard PLA resulting in improved strength and impact resistance
• Almost odourless processing/printing
• Biodegradable

General printing guidelinesandnbsp;*

Nozzle size:andnbsp;andge; 0.15mm	Layer height:andnbsp;andge; 0.1mm	Flow rate:andnbsp;andplusmn; 100%
Print temp:andnbsp;andplusmn; 200 230anddeg; C	Print speed:andnbsp;Medium	Retraction:andnbsp;Yes andplusmn; 5mm
Heat bed:andnbsp;andplusmn; 0 60anddeg; C	Fan speed:andnbsp;50 100%	Experience level:andnbsp;Beginner

*) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers hot ends and printer offsets that it is extremely difficult to give an overall one size fits all setting.

Filament length

andrho;: 1.24 g/cc	50 gr coil	0.5 Kg spool
andOslash; 1.75mm	andplusmn; 16.8m	andplusmn; 168m
andOslash; 2.85mm	andplusmn; 6.3m	andplusmn; 63m

Product export information

HS Code:andnbsp;39169090

Description:andnbsp;Monofilament

Country of origin:andnbsp;the Netherlands

Complianceandnbsp;*

This filament is compliant to below listed directives and regulations.

• RoHS directive 2011/65/EC
• REACH directive 1907/2006/EC

*) This declaration of conformity to directives and regulations is prepared according to our present standard of knowledge and may be amended if new cognitions are available and applies only for the above described products.

Product Code

8718924472521